|the grugq 44f8d09de7 .config for building OpenWRT Attitude Adjustment||6 years ago|
|bin/ar71xx||6 years ago|
|feeds/packages/net/tor-alpha||6 years ago|
|files/etc||6 years ago|
|.gitignore||6 years ago|
|README.md||6 years ago|
|openwrt-35017-to-portal.diff||6 years ago|
|portal_openwrt_build.config||6 years ago|
Personal Onion Router To Assure Liberty
PORTAL is a project that aims to keep people out of jail. It is a dedicated hardware device (a router) which forces all internet traffic to be sent over the Tor network. This significantly increases the odds of using Tor effectively, and reduces the potential to make fatal mistakes.
There are two ways to construct a PORTAL: using a chipped router (recommended), or using "the /overlay trick". Using a modified router (with sufficient onboard flash) provides the most flexibility for internet connectivity (either WiFi or 3G) as well as ensuring that the Tor process has sufficient RAM to run. A chipped router provides the best overall experience. The /overlay trick enables a stock router to union mount a microSD card for additional storage space. This allows for multiple microSD cards to provide different configurations (also possible with a chipped router), but has the downside of requiring a 3G modem with onboard microSD slot.
It is highly recommended to use a modified router. The modified MR11U and WR703N provide a better experience than the stock routers due to the additional RAM. The severe space constraints of the stock router make them very challenging to work with. Due to the lack of usable space, it is necessary to use an external disk to store the Tor packages. The stock router has only a single USB port, and the best option is to use a microSD in a 3G modem.
Attitude Adjustmentdevelopment line. See the OpenWRT wiki for details.
trunkdevelopment line as it has a reduced footprint compared to the
Attitude Adjustmentline (no LuCi, etc.)
ext4filesystem. Make sure you pass the
-O "^has_journal"option to
mkfs.ext4. $ sudo mkfs.ext4 -O "^has_journal" /dev/$DEVICE Insert the microSD into the 3G modem and the modem into the router.
/etc/config/fstabto contain a section for
/dev/sda1with a mountpoint of
/overlay, set to automatically mount. Reboot the router. See the OpenWRT wiki for details, specifically the New external overlay variant (pivot overlay) section.
files/etc/in this project.